ST-Technologie
Creality
MK8 brass nozzleCompatible CR10 / CR10S / ENDER3Available size from 0.2MM to 0.5MMSold individually
Creality
Printhead Creality type V6 full aluminum equipped with 2 fans 5015 - assembly done in 5 minutes 100% plug & play - Does not require any firmware modification - Greatly facilitates the printing...
ST-Technologie
• Bluetooth V5.0 TWS technology• communication distance: about 15m• Frequency range: 20Hz - 20KHz• Sensitivity: 107dB SPL + / - 3dB• Support protocol: HSP / HFP / A2DP / AVRCP• Headphone charging:...
ST-Technologie
Protective sock for the heating body to avoid temperature fluctuations when the fans are triggered. Compatible with Creality print head type V6 Available in Black or White
ST-Technologie
Creality
Printhead Creality type V6 full aluminum equipped with 2 fans 5015 - assembly done in 5 minutes 100% plug & play - Does not require any firmware modification - Greatly facilitates the printing...
Creality
Creality head type V6 full aluminum equipped with 2 fans 5015 for Ender 3 - Installation in 5 minutes 100% plug & play - Does not require any modification firmware - greatly facilitates the...
ST-Technologie
ST Technology presents a compact Bluetooth speaker in cloth that will stand out thanks to its modern design and sound quality that will surprise more than one. Equipped with a 5W speaker and a...
ST-Technologie
ST-Technologie presents one of the smallest Bluetooth speaker in the world! Only 4cm in diameter on 4,2cm high for 44gr. Equipped with a 3W speaker and a 230mAh battery, this portable TWS Bluetooth...
Creality
MK8 brass nozzleCompatible CR10 / CR10S / ENDER3Available size from 0.2MM to 0.5MMSold individually
Creality
Printhead Creality type V6 full aluminum equipped with 2 fans 5015 - assembly done in 5 minutes 100% plug & play - Does not require any firmware modification - Greatly facilitates the printing...
ST-Technologie
• Bluetooth V5.0 TWS technology• communication distance: about 15m• Frequency range: 20Hz - 20KHz• Sensitivity: 107dB SPL + / - 3dB• Support protocol: HSP / HFP / A2DP / AVRCP• Headphone charging:...
ST-Technologie
Protective sock for the heating body to avoid temperature fluctuations when the fans are triggered. Compatible with Creality print head type V6 Available in Black or White
Creality
Creality head type V6 full aluminum equipped with 2 fans 5015 for Ender 3 - Installation in 5 minutes 100% plug & play - Does not require any modification firmware - greatly facilitates the...
Creality
Pneufit fitting for Creality CR10 / CR10S / ENDER / CR-X 3D printer- M10 thread for PTFE tube
Creality
Creality aluminum extruder, 100% plug & play. If you have problems with your original extruder, this extruder will be perfect. To replace your original extruder, select the Left side
Creality
12V heater cartridge for Creality CR10 / CR10S printers
Creality
12V heater cartridge for Creality CR10 / CR10S printers
Creality
Creality 3D Printer ScreenPlease select the model you want between CR10 and CR10S
ST-Technologie
ST-Technologie presents the first complete dual extruder printing kit. Fully plug & play for Creality CR10S 3D printers (12V **) Entirely developed in collaboration with an innovative Chinese...
O'2Nails
Print Gel to use before printing with O2 Nail's Nail PrintersDifference between Print Gel:- The PG0 is transparent- The PG1 is slightly glittery- The PG2 is glittery- The PG3 is a Milk White- The...
ST-Technologie
ST-Technologie presents the first complete dual extruder printing kit. Fully plug & play for Creality CR10S 3D printers (12V **) Entirely developed in collaboration with an innovative Chinese...
ST-Technologie
ST-Technologie introduces the first plug-and-play dual plug-and-play * print head for Creality CR10 / CR10S 3D printers (12V **) Entirely developed in collaboration with an innovative Chinese...
ST-Technologie
With this motherboard Melzi and 5 drivers A4988, your printer will be able to handle double extrusion. Plug & play for Creality CR10, CR10S, Ender 3 printersCompatible with end-of-filament...
ST-Technologie
- Duration of the call: 1 to 3h- Music time: 1 to 3 hours- Standby time: 60h- Charging time: 1 to 2 hours- Battery capacity: 300mAh lithium-ion- Note: the volume setting is only available on IOS,...
ST-Technologie
ST-Technologie presents the first complete dual extruder printing kit. Fully plug & play for Creality CR10 3D printers (12V **) Entirely developed in collaboration with an innovative Chinese...
ST-Technologie
ST-Technologie presents the first complete dual extruder printing kit. Fully plug & play for 3D Creality CR10S5 500x500 (12V **) printers Entirely developed in collaboration with an innovative...
ST-Technologie
ST Technology presents a compact Bluetooth speaker in cloth that will stand out thanks to its modern design and sound quality that will surprise more than one. Equipped with a 5W speaker and a...
O'2Nails
ST-Technology introduces Nail's X11 O2 Nail Printer. Entirely made of aluminum this nail printer will allow you to print the models present in the "O2 Nails" application or directly your photos...
Creality
Creality CR-X Full Print Head Kit
ST-Technologie
With this motherboard Melzi and 5 drivers A4988, your printer will be able to handle double extrusion. Plug & play for Creality CR10, CR10S, Ender 3 printersCompatible with end-of-filament...
ST-Technologie
ST-Technologie presents the first complete dual extruder printing kit. Fully plug & play for 3D Creality CR10S5 500x500 (12V **) printers Entirely developed in collaboration with an innovative...
Creality
Creality CR-X 3D Printer Touch Screen
ST-Technologie
ST-Technologie introduces the first plug-and-play dual plug-and-play * print head for Creality CR10 / CR10S 3D printers (12V **) Entirely developed in collaboration with an innovative Chinese...
Creality
Creality CR-X Printer MotherboardAllow to manage double extrusion
